How to Build a Large Spruce Mansion in Minecraft
Construct an expansive survival base in Minecraft using spruce wood, stone bricks, and deepslate, complete with structural framing, layered walls, and peaked roofs.
- Read the tools, materials, safety notes, and steps below for free.
- Tap Start Camera Coach when you want hands-free voice help.
- Allow camera and microphone. Point your phone at the work; the coach watches your progress and tells you the next step.
🧰 Required Tools & Equipment
- ✓ Diamond or Netherite Axe
- ✓ Diamond or Netherite Pickaxe
- ✓ Scaffolding
- ✓ Water Bucket
- ✓ Torches or Lanterns
📦 Materials & Supplies
- ✓ Spruce Logs and Planks
- ✓ Stone Bricks and Cobblestone
- ✓ Spruce Stairs and Slabs
- ✓ Deepslate Tiles or Dark Oak Planks
- ✓ Glass Panes
- ✓ Spruce Trapdoors and Leaves
⚠️ Safety Checkpoints & Warnings
- • Keep a water bucket on your hotbar to quickly negate high fall damage while roofing.
- • Place temporary torches across all floors during construction to prevent hostile mob spawning.
- • Take regular screen breaks and maintain good wrist posture during long repetitive block-placing sessions.
📋 Step-by-Step Guide (6 Steps)
Clear Ground and Mark the Footprint
Flatten a 40x40 block build site and outline the mansion footprint using cobblestone and stone bricks. Place stripped or regular spruce logs at every corner and intersection spaced 5 to 7 blocks apart to define room modules.
- • A clear, level building area with a distinct perimeter grid on the ground.
- • Corner log markers positioned at regular intervals outlining multiple wings.
- • Building on uneven terrain without a level foundation.
- • Making room dimensions even-numbered, which prevents centered doors and roof peaks.
Erect Log Pillars and Crossbeams
Extend all corner spruce logs upward by 5 blocks for the ground floor. Connect the tops horizontally with horizontal spruce logs facing along the axis of the walls to create a sturdy structural skeleton.
- • A rigid 3D wooden box frame across the entire building footprint.
- • All horizontal log ends neatly aligning with the vertical pillar tops.
- • Placing horizontal logs with mismatched bark grain directions.
- • Failing to stack scaffolding, leading to repeated jump-placement errors.
Infill Walls and Install Window Cutouts
Fill the lower two blocks of wall sections with stone bricks and the upper three blocks with spruce planks. Recess the wall panels one block inward from the log frame, leaving 1x2 or 2x2 openings for glass panes.
- • Solid, recessed wall panels framed completely by the outer log skeleton.
- • Uniform window openings fitted with flat glass panes.
- • Placing walls flush with the outer log pillars, resulting in flat, lifeless walls.
- • Using full glass blocks instead of panes, which reduces depth.
Construct Multi-Tiered Peaked Roofs
Frame the roof gables using Deepslate Tile or Dark Oak stairs along the outer edges, following an alternating stair-slab pitch. Fill the main roof body with spruce stairs, letting each gable overhang the wall by one block.
- • Sharp, steep roof peaks with a distinct dark outline and lighter spruce infill.
- • A one-block roof overhang extending beyond the log framework on all sides.
- • Building a flat or single-plane roof across large floor plans.
- • Placing stairs upside down in the main slope, creating unwanted holes.
Add Exterior Trim and Depth Detailing
Attach spruce trapdoors as shutters beside windows and along exposed log beams. Place lanterns hanging from chains under eaves, and drape spruce leaves around foundation corners to blend the mansion into the surrounding landscape.
- • Windows framed with folded trapdoors serving as shutters.
- • Lanterns hung symmetrically under gables casting warm light across exterior walls.
- • Over-detailing with buttons and trapdoors on every single block, creating visual clutter.
- • Leaving exterior alcoves unlit, allowing zombies and creepers to loiter underneath.
Lay Interior Floors and Structural Lighting
Replace the dirt floor on the ground level with checkered stripped spruce logs or polished andesite. Construct interior spruce staircases to access upper floors, and install chandeliers or ceiling-mounted lanterns in every room.
- • Finished solid wooden or stone flooring throughout all interior rooms.
- • Brightly illuminated rooms with no dark patches in corners or stairwells.
- • Leaving dirt showing under walls or interior doors.
- • Building stairs that obstruct doorways or lack sufficient head clearance.
Credit: inspired by an original tutorial by Folli — watch the original on YouTube.
Don’t have everything?
- No Deepslate Tiles? Dark Oak Planks or Cobblestone Stairs
- No Scaffolding? Dirt blocks or ladders for temporary vertical climbing
- No Lanterns? Torches placed on fence posts